Roadi RDT51 - Manual (Page 65)

OWNER S MANUAL
,
OBD2 Car Scanner
61
CHECK
Custom Data Set
=========================_=_5
Pick Trigger Mode
=========================1/2
Manual Trigger
=============================
11). Use UP/DOWN scroll button to select a trigger mode and press
ENTER button.
If data from previously tested vehicle is not erased, data from current
test will be stored in temporary cache. Following screen shows when
Manual Trigger is selected:
Ready to record!
Press [ENTER] to start
recording……
Press [ESC] to exit
DTC_CNT #01
FUELSYS1
FUELSYS2 #02
LOAD_PCT(%) #03
ETC( F )
SHRTFT1(%)
Manual Trigger
DTC Trigger
Or following screen shows when DTC Trigger is selected:
DTC Trigger
=============================
Waiting for DTC to
trigger recording
…
Press [ESC] to exit