Roadi RDT51 - Manual (Page 32)

OWNER S MANUAL
,
OBD2 Car Scanner
28
CHECK
Diagnostic Menu
I/M Readiness
I/M Readiness
========================4/6
===========================
========================1/2
Reading PID…
- Please Wait -
2) Wait a few seconds while the scan tool validates the PID MAP.
3) If the vehicle supports both types of tests, then both types will be
shown on the screen for selection.
4) Use
UP/DOWN scroll button, as necessary, to view the status of the
MIL lig ht (“ON” or “OFF) and the following monitors:
Misfire monitor -- Misfire monitor
Fuel System Mon -- Fuel System Monitor
Comp. Component -- Comprehensive Components Monitor
EGR -- EGR System Monitor
Read Codes
Erase Codes
View Freeze Frame
I/M Readiness
Vehicle Info.
Unit of Measure
Since DTCs Cleared
This Drive Cycle
completed its diagnostic testing.
" N/A”" -- The monitor is not supported on that vehicle.
1) Use
UP/DOWN scroll button to select I/M Readiness from
Diagnostic Menu and press ENTER button.