Owner s manual, 1 reading codes, Obd2 car scanner – Roadi RDT51 User Manual
Page 26
OWNER S MANUAL
,
OBD2 Car Scanner
22
CHECK
8 If you wish to erase the data, press
ENTER button; if you do not want
to erase the data, press
ESC or use LEFT/RIGHT button to select NO
and press
ENTER to continue.
9 View a summary of system status (MIL status, DTC counts,
Monitor status) on screen. Wait a few seconds or press any key for
Diagnostic Menu to come up.
System Status
Control Module
===========================
========================1/2
MIL Status ON
Codes Found
6
Monitors N/A
3
Monitors OK
3
Monitors INC
5
If more than one module is detected, you will be prompted to select a
module before testing.
Use UP/DOWN scroll button to select a module and press ENTER
button.
5.1 Reading Codes
Reading Codes can be done with the key on engine off (KOEO) or with
the key on engine running (KOER).
Stored Codes are also known as “hard codes” or “permanent
codes”. These codes cause the control module to illuminate the
malfunction indicator lamp (MIL) when emission-related fault occurs.
Pending Codes are also referred to as “maturing codes” or“continuous
Engine
Module $A4