Roadi RDT51 - Manual (Page 125)

OWNER S MANUAL
,
OBD2 Car Scanner
121
CHECK
Test $01…
=======================
Diagnostic Menu…
==================-=8/11
ID: 00
MOD : $11
MEAS: 0
MAX : 0
MIN : --------
STS : OK
For CAN-equi pped vehicles, test results displayed can be as below:
6) Press ESC button to return to the previous menus.
11.8 Component Test
The Component Test function allows initiating a leak test for the vehicle's
EVAP system. The scan tool itself does not perform the leak test, but
commands the vehicle's on-board computer to start the test. Different
vehicle manufacturers mig ht have different criteria and methods for
stopping the test once it has been started. Before starting the Component
Test, refer to the vehicle service manual for instructions to stop the test.
1) Use
UP/DOWN scroll button to select Component Test from
Diagnostic Menu and press ENTER button.
2) Wait a few seconds while the scan tool validates the PID MAP.
On-Board Mon. Test
Component Test
Vehicle Info.
Modules Present
Unit of Measure