Roadi RDT51 - Manual (Page 29)

OWNER S MANUAL
,
OBD2 Car Scanner
25
CHECK
Diagnostic Menu
========================2/6
2) A warning message comes up asking for your confirmation.
Erase Codes
Erase Codes
===========================
===========================
Erase trouble codes!
Are you sure?
YES NO
If you do not want to proceed with erasing codes, press
ESC button
or use
LEFT/RIGHT scroll button to select NO to exit. A message of
Command Cancelled!” show ups. Wait a few seconds or press any key
to return to Diagnostic Menu.
3) Press
ENTER button to confirm.
If the codes are cleared successfully, an “Erase Done!” confirmation
message shows on the display.
Erase Done!
Press any key to con.
If the codes are not cleared, then an" Erase Failure. Turn Key on
with Engine off!"” message appears.
Read Codes
Erase Codes
View Freeze Frame
I/M Readiness
Vehicle Info.
Unit of Measure