Roadi RDT51 - Manual (Page 126)

OWNER S MANUAL
,
OBD2 Car Scanner
122
CHECK
Component Test …
=======================
Component Test …
==================-=1/1
Working …
==================-=1/1
Component Test…
=======================
Reading PID…
- Please Wait -
3) From
Component Test menu, use UP/DOWN scroll button to select
the test to be initiated.
4) If the test has been initiated by the vehicle, a confirmation message will
be displayed on the screen.
Command Sent!
Press any key to con.
Some vehicles do not allow scan tools to control vehicle systems or
components. If the vehicle under test does not support the
EVAP Leak
Test, an advisory message is displayed on the screen.
The selected mode is
not supported
Evap Leak Test
Press any key to con.