Ohm twin-lead cable (flat), Ohm coaxial cable (round), Connect the tv to ybur antenna/cable – Sony KV-27XBR55 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
4. Connect the TV to Ybur Antenna/Cable
To be continued ^
VtMi can use either an indoor or outdoor antenna with your TV.
We recommend using an outdoor antenna for better picture
quality.
Vbu can receive cable TV by connecting a cable supplied by
your local cable company.
To Connect a VHF, UHF, orVHF/UHF Combination
Antenna * or CATV Cable
300-ohm twin-lead cable (flat)
75-ohm coaxial cable (round)
1
Check your antenna cable type and prepare the end of
the cable using the F-type connector.
Attach an F-type connector (not supplied).
(Rear of the TV)
VHRUHF
Plug the connector into the VHf?UHF terminal at the
rear of the TV.
* Most combination antennas are equipped with a signai spiitter.
Remove the spiitter and attach the appropriate connector.
1
Check your antenna cable type and prepare the end of
the cable using the antenna connector.
Attach an antenna connector (not supplied).
3
§
3
3
Plug the connector into the VHRU HF terminal at the
rear of the TV.
(Rear of the TV)
a
S
CD
s
For better picture quality, connect optional antenna cable
S
so that the 300-ohm twin-lead cable can be separated
»
a distance from the TV.
S
Chapter 1: Set up
115