Setting up on the screen, O0© a – Sony KV-27XBR55 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting up on the Screen
pwt
IV mmt mu>t mmt
U3C3CDUD
O0© a
©0© m
© © 0 s a
9mM mmmgmsm
□ © □ □ a
rm wawn m
CZ3 [ED □□
-RETURN
(playbadO
VTR1/2/3
MDP
Direct Play Function
With this function, you can change the Input mode from TV to VCR by pressing the
> (playback) button on the supplied Remote Commander.
Example: When you connectyour VCR to the VIDE011N Jacks and control the
VCR when the VTRV2/3 MDP selector Is set to VTR2 on the supplied Remote
Commander.
First, the TV needs to memorize the VTR selector position on the Remote Cotrh
mander which you use to control your VCR.
Stepl-4: Same as in “Labeling Each Video Input Mode” (page 4S)
Press +/ - until > points to “DIRECT PLAY”.
b
VIDEO LABEL
VIDEO 1; S VIDEO
VIDEO
2 i
VIDEO 2
VIDEO 3: VIDEO 3
►DIRECT PLAY
Press
RETURN.
RETURN
If you have not set the manufacturer’s code
yet, see page 60 and set it. (When you use
Sony video equipment, this setting is not
necessary. For details, see page 59)
DIRECT PLAY
ProDram your
remote with
"pre-set code*
before using
DIRECT PLAY
feature.
Press RETURN
RETURN
%
DIRECT PLAY
►VIDEO 1: OFF
VIDEO 2: OFF
VIDEO 3: OFF
VIDEO LABEL
50
Chapter
4:
Advanced Operation