Selecting mts (multichannel tv sound program) mode – Sony KV-27XBR55 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting the Picture and Sound
Notes
To restore the normsi picture
Press EXIT.
If you press RESET during the “AUDIO” page
is displayed
The MTS mode is not affected.
The three modes of MTS
--------- @-
MAIN
~TZ
-H
mono
Selecting MTS (Multichannel TV Sound program) mode
7b listen to stereo sound, select the MAIN mode so that the on-screen MAIN
Indication appears. The STEREO Indicator on the TV lights up whenever a stereo
broadcast Is received.
To listen to the second audio program, select the SAP mode
There may be cases of stereo broadcasts where excessive noise will be heard due
to a weak Incoming signal. Vbu may be able to eliminate this noise by selecting the
MONO mode
1
Press MENU and select “AUDIO” with + / -, then press RETURN.
Press + / - until > points to “MTS”
b
Press
RETURN.
RETURN
AUDIO
TREBLE
BASS
BALANCE
NTS: MAIN
U$e(A y]B[RETURN]
Press + / - to select MAIN, SAP or MONO.
lA
b
AUDIO
TREBLE
BASS
BALANCE
MTS: SAP
U$e(A 7)tCRETURN]
Press RETURN.
RETURN
34 I
Chapter 3: Adjustment