Sony KV-27XBR55 - Manual (Page 64)

1
If Ybu Have any Trouble
Vbti can eliminate disturbances in picture and sound ty
checidng the symptoms and idllcwtng the suggestions listed
below.
Problem Check and Adjust
Poor or no picture (Screen not lit), good
sound
Good picture, no sound
No picture (screen not lit), no sound
No color
Snow and noise only
Learning function on the commander
does not work.
Dotted lines or stripes
Double images or ghosts
•Adjust PICTURE.
•Adjust BRIGHT.
• Check antenna/cable connections.
• Press VOLUME + ontheTVorVOL + ontheRemote
Commander.
• Press MUTING on the Remote Commander.
• Check that the MTS button is set correctly.
• Check that the TVfVIDEO or Input select button Is set
correctly.
• Set the SPEAKER SW (switch) to ON.
• Is POWER switched on?
• Plug the unit into a wall outlet.
• Check that the TVA/IDEO or input select button is set
correctly.
• Is it a color program?
•Adjust COLOR.
• Is it an active or the correct channel?
• Check the CABLE setting.
• Check the ANT/AUX button setting.
• Check antenna/cable connections.
• Check the USEA.EARN selector setting.
• Check that the Remote Commanders are positioned
property.
• Check to see if the batteries are exhausted.
• If there is a fluorescent lamp near by, move the Remote
Commanders away from it.
This is often caused by local interference. (e.g. cars, neon
signs, hairdryers, eta) Adjust the antenna for minimum
interference.
Reflections from nearby mountains or buildings often cause
this problem.
A highly directional outdoor antenna or a CATV cable may
improve the picture.
Try another channel. It could be station trouble.
If the problem persists, contact your nearest sendee facility.
641
Appendix