Insert the print cartridges, Insert the print cartridges -4, L i ] iu^oci liie cables – Sony IJP-V100 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. L i ] iu^oci liie Cables
I m p o i l . n t : ' . o u m u s t a t t a c h t h e e n c l o s e d b i - d i r e c t i o n a l p a r a l l e l c a b l e
Ircmi tlie Sotn UP-V 100 to your eoiuputer. If you don't, the Sony
1.1 P-V 100 won t w ork.
• Foi salcty. tutu oil youi computer before connecting the cable.s.
• Connect the
notched end of the
bi-directional par
allel cable firmly
to the cable port
ott the back of tlie
Sony 1.1 P-V 100.
Snap both metal
clips into the
notches on the con
nector.
Cable port
Notched end
of cable
• Plug the other end of the cable into the parallel (LPT 1) port on the
back of your computer. Tighten the connector’s .screws.
• Plug the Sony IJP-V lOO’s power cable into a grounded outlet.
4. Insert the Print Cartridges
• After you plug in the power, the Sony IJP-V 100 will power up
automatically. Note that the display on the keypad will read, “See
instructions to print demo” until after you install the software in
Step 7.
- • Wait until the Sony IJP-V 100 finishes making start-up noi.ses
(about 10 seconds), then open the cover of the Sony IJP-V 100.
The empty print cartridge holder will move into view.
Cover
1-4