Sony IJP-V100 - Manual (Page 82)

How to scan with TWAIN
Note: If your software program does not support TWAIN, the follow­
ing procedure will not work.
O
Make sure your software program has the Sony IJP-V100
selected as the scanning source. Usually, you can check this by
choosing Select Source from the File menu or by selecting Acquire/
Select Source from the File menu in your software program.
If you can’t find where to select the scanning source in your software
program, check the program’s documentation.
o Open the file in your software program where you want the
image to be placed.
o Load your document in the document tray with the printed side
facing away from you (as many pages as your software program will
allow, or a single document carrier^ If necessary, slide the document
guides on the tray to the left or right to adjust them for the width of
your document.
Note: If the VAIO Document Assistant is displayed at this point,
please close it.
O
Select Acquire Image from the File menu in your software pro­
gram. (Some programs may have a slightly different command, like
Acquire.)
If the Scan Settings dialog box is displayed (illustrated on page 5-3),
choose from the many scanning options, or click
Help for informa­
tion about the options. Some applications scan using their own set­
tings, however, and in this case the Scan Settings dialog box won’t be
displayed.
The image will be scanned directly into your application. Now you
can edit the image using the tools in your TWAIN-compliant software
program.