Sony IJP-V100 - Manual (Page 75)

Controlling how your copies will look
When you make a copy from the VAIO Document Assistant, the way
it looks is determined by the settings in the Copy dialog box. These
settings will not affect copies made from the keypad.
Optimizing the quality
The Sony IJP-VlOO software is factory-set to optimize the words in
your copies. When your original is a photograph or graphic, click the
Original is photo or graphic checkbox for best quality.
Darkening and lightening
(Contrast setting)
When you want the copy to be darker or lighter than your original
document, drag the slider bar in the Contrast area to the Contrast set­
ting you want.
Reducing and enlarging
When you want the copy to be smaller or larger than your original
document, change the Reduce/Enlarge setting.
Note: When Original is photo or graphic is selected in the Copy
dialog box, you won’t be able to enlarge your document.
Reduce/Enlarge* method: Settings available:
Change the-number in the
entry box.
(Factory setting = 100%)
Enter a number between 50 and 200 to
reduce to as small as half of the original size or
to enlarge to up to twice the size.
Choose from the selection
box.
(Factory setting = Actual size)
Actual Size makes the copy the same size as
your original.
Legal to Letter reduces the original from
legal-size to letter-size.
Letter to A4 reduces the original from letter-
size width to A4-size width.
A4 to Letter enlarges the original from A4-
size width to Letter-size width. (Make sure you
have letter-size paper in the paper tray when
you choose this setting, or your copy will print
on multiple pages.)
Drag the slider bar.
(Factory setting = 100%) Drag to a number between 50 and 200
to reduce to as small as half the original size or
to enlarge to up to twice the size.
* If you enlarge to a size that won’t fit on the paper you have loaded, your copy will be
printed on multiple pages.
4-7