Loading the paper supply for copying, Loading the paper supply for copying -2 – Sony IJP-V100 User Manual
Page 70
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Loading the Paper Supply
for Copying
O
Pull the document tray forward all the
way until it snaps into the upright position.
o Load up to 150 sheets of 20-lb paper
(about a 1/2-inch-thick stack) into the paper
tray. The paper should fit behind the stack
guides on the lower part of the tray as
shown.
Notes:
1) Use only plain paper for copying.
2) Use only letter- or legal-size paper for
copying.
3) If you change the paper size in the tray, be
sure to update the paper size setting in the
software. Refer to “Changing the paper size
setting” in Chapter 3 under “Advanced fax
receive features” for instructions.
e Push the document tray back to its nor
mal position, resting in front of the paper
tray.
O Extend the output tray slowly until it
stops.