Changing the number of rings before answering – Sony IJP-V100 User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing the number of rings
before answering
When Phone Answering is set to Automatic, the Sony IJP-V100 will
automatically answer all calls after the number of rings specified in
the Rings to Answer setting. For example, when Rings to Answer is
set to I ring, your fax line will ring once, then the Sony IJP-V 100 will
begin sending fax tones.
When you first installed the Sony UP-VI00 software, the Setup Wiz
ard asked you a series of questions about your phone lines and equip
ment. Your answers determined the
appropriate
option for this setting
(and many others) and the Setup Wizard set it for you automatically.
If you decide to change this setting now, you should do it only tempo
rarily (for one fax only), then change it back,
or,
if you have changed
your equipment setup since you first installed the Sony IJP-V 100, re
run the Setup Wizard and make your changes there. (Refer to “Updat
ing your fax receive setup” later in this chapter for instructions.)
To change the
Rings to Answer
setting:
O
On your Windows desktop, double-click
VAIO Document
Space,
click
Fax,
and select
Receive Settings.
0 Click the
Answering
tab.
Sony IJP-VlOO Receive Fax SeUmgs
Change the Rings to Answer
setting in the Answering tab.
0
In the box to the right of the
Number of Rings to Answer
area,
enter a number between 1 and 6, inclusive.