Controlling how your copies will look, Optimizing the quality (resolution setting), Controlling how your copies will look -4 – Sony IJP-V100 User Manual
Page 72: Optimizing the quality (resolution setting) -4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
O
Load your document with the printed
side facing away from you (up to 20 pages,
or a single document carrier). If necessary,
slide the
document guides on the tray to
the left or right to adjust them for the width
of your document.
Note; Always remove staples and paper
clips from your original before faxing to
avoid equipment damage.
O Press the Copy button, then enter the
number of copies you want (up to 99).
O Press the Copy button again to begin
copying.
The entire original document will be
scanned before copying begins.
The original document will be face-down in
the output tray, and the copies will be
face-up. For copy collating information, see
“Automatic collating” later in this chapter.
To cancel a copy in progress, press the Stop button on the Sony IJP-
VI00 keypad.
Controlling how your copies will look
When you make a copy from the Sony IJP-V100 keypad, the way it
looks is determined by the Contrast and Resolution settings that are
selected on the keypad with the Contrast/Resolution button.
Note: The Contrast/Resolution button settings also affect the qual
ity of paper faxes sent from the keypad. See “Changing the Resolu
tion” under “Using Advanced Fax Features” in Chapter 3.
Optimizing the quality
(Resolution setting)
Before beginning to copy, change the Resolution setting on the key
pad to optimize for words, drawings, or photographs
O
Press the Contrast/Resolution button.
O Press 1 to select Resolution.
O Press 1, 2, or 3 to select the best quality for words, or press 41(
select the best quality for photographs and graphics.