Changing the time and date, Changing the time and date -27 – Sony IJP-V100 User Manual
Page 68
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
changing the time and date
• When the Sony IJP-Vl 00 is connected to your computer with
the bi-directional parallel cable, the time and date shown on the key
pad display are taken from the time that’s set in your computer. If you
need to change the time (for daylight savings, for example) and date,
reset them on your computer, and they will be automatically updated
in the Sony IJP-Vl00.
• When the Sony UP-V100 is disconnected from your computer,
then powered off, the time and date information will be lost. The mes
sage Press START to set time/date, or STOP to skip will be
displayed on the Sony IJP-VIOO. To reset the time and date, you can
either reconnect the Sony IJP-VIOO to your computer with the bi
directional parallel cable, or you can press the Start button on the
keypad and follow the instructions for setting the time and date.