Sony IJP-V100 - Manual (Page 17)

Connect your PC-modem to the Sony IJP-VIOO. Find the
phone cord that goes from the back of your computer (your PC-
modem) to a wall jack. Disconnect the cord from the wall Jack and
plug it into either of the two ports on the back of the Sony IJP-
VIOO labelled, “To Phone, Answering Machine, or Modem.”
Important: If your PC-modem’s software is set to automatically
receive faxes to your computer, turn off that setting; if you don’t,
your Sony IJP-VIOO will not be able to receive faxes properly.
Connect your phone to the Sony UP-VIOO. Connect the cord
from your phone to either of the two ports on the back of the Sony
IJP-VIOO labelled, “To Phone, Answering Machine, or Modem.”
The benehts of connecting a phone in this situation are 1) For the
convenience of having a phone close by to make outgoing voice
calls, and 2) In case you need to send a fax (press START) after
calling someone who must receive their faxes manually.
After you install the software in Step 7, and answer the Setup
Wizard questions for this connection case, here’s how you’ll auto­
matically receive faxes with the Sony IJP-VIOO:
Your fax line will
ring once, then the Sony IJP-VIOO will answer and begin emitting
fax tones to the sending machine.
Continue with Step 7, “Install the Software - REQUIRED!”
Dedicated line with external modem (ACI)
If in Step 2 you connected the Sony IJP-V100 to a dedicated phone
line (no voice calls received) that also has an exteinal modem con­
nected to it, then use this connection diamam.
Phone optional,
but recommended External
modem Telephone
wall jack
Connect your external modem to the Sony IJP-VIOO. Find the
phone cord that goes from the back of your external modem to a
wall Jack. Disconnect the cord from the wall Jack and plug it into
either of the (wo ports on the back of the Sony 1.1 P-V 100 labelled.
'■ To Phone. Answering Machine, or Modem.”
I I 1