Channel, Auto program, Cable – Sony KP-48V80 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Select a channel
Move-r Select a F»ii MEMJ
After AUTO SET UP, you can erase unnecessary
channels from the channel preset memory.
With the Channel Skip/Add window open:
Move the joystick up or down to select the desired
channel. You can view the channel that is selected
with the Channel Skip/Add menu in the sub screen.
You can also use CH +/- or 0-9 and ENTER
2 Press 0 .
Move the joystick up or down to select
and press © .
The selected channel will be erased.
If you want to re-enter the skipped channel, follow the steps above and select
to signal the projection TV to automatically program all receivable
channels. When all the receivable channels are stored, the lowest numbered
channel is displayed.
to cancel Auto Program.
if your projection TV is connected to a cable system.
if your projection TV is connected to an antenna.