System suspend mode, System save to disk mode – Sony PCG-705 User Manual
Page 132
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
System Suspend Mode
The computer saves the current state of the system in RAM and switches
off power to the CPU. If the remaining battery charge drops to less than
5% during system suspend mode, the computer automatically enters the
system save to disk mode. The power indicator light flashes in this mode.
To activate system suspend mode
Press Fn+Esc, or slide the power switch forward and hold it for at least
four seconds. You can also use the PowerPanel utility to enter system
suspend mode.
To return to normal mode
Press any key.
System Save to Disk Mode
The state of the system is saved on the hard drive and power is turned
off. The power indicator light is off in this mode.
To activate system save to disk mode
Press Fn+F12. You can also use the PowerPanel utility to enter system
save to disk mode.
To return to normai mode
Turn on the computer by sliding the power switch forward. The
computer returns to its previous state.
^ When returning from system save to disk mode, the system status stored on the hard disk is
erased and the computer starts normally if you slide the power switch forward and hold for
at least four seconds.
□ Time to return to normal mode;
System standby < System suspend < System save to disk
□ Power consumption:
System standby > System suspend > System save to disk
124