Sony PCG-705 - Manual (Page 94)

Placing and Receiving Phone Calls
To place a phone call
1 Dial or select the number you want to call. You can:
□ Dial the number using the Communication Center’s dial pad or
the numeric keypad on your keyboard, then click the DIAL
button.
□ Click the PHONE BOOK button, select the Phone Book tab, then
double-click the name of the person you want to call.
□ Click the REDIAL button on the Main screen to redial the last
number you called.
□ Previously placed calls are logged in the Call Log. To call any of
these numbers again, select an entry from the Log tab of the
Phone Book, then click the DIAL button.
^ If you make a mistake while dialing, dick the CLEAR button on the Main screen to
delete one digiti or double<lick to delete the entire number.
2 To end the conversation, click the HANGUP button on the
Communication Center’s handset.
To answer a phone
If you want to be able to answer incoming calls while working in another
program, the “Maximize on Ring” checkbox on the Interface tab of the
Options dialog should be checked. “Maximize on Ring” is the default
option.
□ When you have an incoming call, the SPEAKERPHONE button on
the Main screen changes to the ANSWER button. Click this button to
answer the call.
^ If you are running another data terminal application that is answering incoming calls
instead of the Communication Center, change the settings in the data terminal application
so that it will not answer incoming calls, or set it to answer after a number of rings that is
greater than the number of rings that the Communication Center is set to answer calls.
86