Using the weight saver – Sony PCG-705 User Manual
Page 65
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Using the Weight Saver
The weight saver protects the drive bay when it is empty.
To attach the Weight Saver
1
If another device is in the drive bay. remove the device.
There is an Eject lever on the bottom of the floppy disk drive and
CD-ROM drive. To remove the drive, slide this lever in the direction
of the arrow.
2
Slide the weight saver in the direction of the arrow until it clicks.
Weight saver (supplied)
To remove the Weight Saver
There is an Eject lever on the bottom of the weight saver. To remove the
weight saver, slide this lever in the direction of the arrow.
57
Advertising