Using battery power – Sony PCG-705 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Using Battery Power
You can use one or two battery packs as a source of power. A second
battery pack can be inserted into the drive bay on the right side of the
computer. (See “Using a Second Battery Pack” on page 55.) Additional
battery packs are available as a separate option.
To insert the battery pack
1
Open the cover of the battery bay.
2
Insert the battery pack into the battery bay on the left side of the
computer.
Battery pack
(supplied)
3
Close the cover of the battery bay.
To charge the battery pack
1
Connect the AC adapter to the computer.
2
Insert the supplied battery pack.
The computer automatically charges the battery (the battery indicator
light flashes while the battery is charging). When the battery is 85%
charged, the battery indicator light turns off. This process takes
approximately one and a half hours. To charge the battery
completely, continue charging for an additional hour.
10