Sony PCG-705 User Manual
Page 149
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
4
5
Remove the memory module from its packaging.
Install the memory module.
Q]
Connectors
[U
6
7
8
Q] Slide the memory module into the slot.
[H The connectors snap into place when the board is correctly seated.
Close the cover and tighten the screws.
Turn on the computer.
Click the My Computer icon with the right button and select
Properties.
The System Properties screen appears.
Click the Performance tab to view memory.
If the additional memory is not shown, repeat steps 1-9.
141
Advertising