AVer SEB3104H - Manual (Page 14)

8
Chapter 2 Using the DVR Software
Please use the mouse with virtual keyboard to configure DVR setting.
2.1 First Time Using the DVR Unit
Step 1. Login to the DVR System
1. Connect the cameras
2. Connect the mouse to DVR unit(through USB port on front panel)
3. Power on the DVR unit.
4. The preset screen (color bar) will show up and wait for preview screen to display (about 60
seconds).
5. When preview screen show up, please wait for the authorization dialog pop-up. For security
purpose, enter the User ID (default is Admin; fist letter is capital) and Password (default is
111111) to login the DVR system.
6. Click to call out virtual keyboard to enter the ID and password.
7. After login, the preview screen will show up.
Preview Mode