AVer SEB3104H - Manual (Page 31)

25
video system setting is wrong, the video would appear abnormal.
- Date Format: Select the date format which wants to display in preview and playback mode
- AutoScan Period: Set the time gap of the Auto Scan function from 3 to 10 seconds. This
automatically switches to the next video in cycle depending on the set time gap.
- Lanaguage: Customize the system to display the tool tips and dialogs based on the
selected language. Default language is in English.
- Control Bar Position: Set the position of UI control bar. The higher value the control bar will
move upper.
(3) Login
Enable the conditions in Login section you want the system to automatically carry out.
- Auto login when OS start: Automatically login to DVR system when DVR system is
executed.
- Auto record when login: Automatically start video recording when the DVR system is
executed.
(4) Audio Setup
- Audio Mute: Enable/disable audio output at preview mode.
(5) Configuration
Backup a copy of all the settings and allows you to regain the same settings back. To save the
current settings, click Export. To replace the settings with the one you have saved, click Import.
(6) Firmware
Display the current firmware version.
(7) Playback mode: Select the mode of playback the video.
- Select date and time: Select the date and time which user wants to playback.
- Play the last file: Automatically playback the video from the last hour
- Instant Playback: Automatically playback the video which has just recorded
(8) Touch Panel Calibration: Adjust the touching accuracy of the touch monitor.
Click Start to enter the adjusting interface. Follow the on screen direction and using the mouse to
click the calibrate point to adjust. To stop the calibrate, click Stop.