AVer SEB3104H - Manual (Page 74)

68
Message: Type the message.
 Email Notice Setting
Notice Interval: Set the period of time before it sends another e-mail notice.
- Start Recording
Record the video from the selected camera.
1. Select the camera to enable/disable video
recording. Mark All to select all cameras.
2. In the Frame Rate selection, select As Setting
to record the number of frames based on the
Recording Setting or Max to record the
maximum of frames based on the available
speed.
3. In the Start Recording prior text box, mark
and set the number in second for the DVR
system to pre-recording before the alarm
happen.
4. In the Stop Recording after text box, mark
and set the number in second for the DVR system to continue recording after the alarm
has ended. If user doesn
’t mark and set the time, the alarm recording will continue
recording until alarm is reset.
5. Click OK to complete the setting.
- PTZ Preset Point
Position the PTZ camera based on the preset point
setting. Beside the PTZ preset point check box, click
Detail. In the PTZ Setup dialog box, select the PTZ
camera number then mark the Enable check box.
Select the Alarm Trigger and Alarm Close of the PTZ
camera when the alarm is activated and ended. User
also can select Auto Pan group as alarm is activated
and ended.