AVer SEB3104H - Manual (Page 32)

26
Part II
Click Next to go to next setup page, click Back can go back previous setup page. Click OK to
accept the new settings, click Cancel to exit without saving.
(1)
(2)
(3)
(1) Storage
Display the recorded video save path. User can format the hard disk and calculate the
approximately capacity of hard disk for recording.
-
Format: To format the hard disk.
1. Click Refresh to get the current storage path list.
2. Select the storage path and click Format button.
- Calculate: To calculate the capacity of hard disk for recording, click Calculate. And then, fill in
the hard disk capacity in Expected HD Size (GB) or enter the expected record days in
Expected Recording time (Days), and then, click Calculate to start calculation. To reset the
entered value, click Clear. The result will be shown in Total Record Time (Days) column. To
exit, click OK.
- Overwrite Enable: When there is not enough free space to record one hour data, the system
automatically replaces the oldest data.
- Record Limit Days: If you want the system to automatically erase the data after a certain days,
enable the Record Limit check box and enter the numbers of days in Days text box.
(2) Daylight
Mark Day Light Saving check box to enable daylight saving. And then, select the Start and End
Time by click Setting.
- Time Offset: Assign a time that it is for daylight saving time offset in your time zone. For example:
if the time zone is in U.S. Eastern, the time offset is 1 hour.