AVer SEB3104H - Manual (Page 22)

16
2.3 Familiarizing the Functions in Playback Mode
Click (playback) button at the lower right corner of Preview mode user interface to switch to
Playback mode.
The maximum decoding fps in D1 resolution is 60 fps. The playback speed is default in 1/2x when
display in QUAD mode. In one channel display mode, the playback speed is in 1x (normal speed).
Name Function
(1) Playback
Control Buttons
ı: Move at the beginning of the recorded video file.

ı: Go back to the previous frame.
: To reduce the playback speed. When each time press, the speed will reduce
1/2 from original speed (16X, 8X, 4X, 2X, 1X, 1/2X, 1/4X, 1/8X, 1/16X).
: Wind back the recorded video file.
: Briefly stop playing the recorded video file.
: Play the recorded video file. Back to 1X playback speed when playback speed at
faster or slower speed
: To faster playback speed. When each time press , the speed will double the
playback speed (1/16X,1/8X, 1/4X, 1/2X, 1X, 2X, 4X, 8X, 16X).
ı: Go to the next frame.
 ı : Go to the end of the recorded video file.
(2) Split Screen
Mode
Select from 2 different split screen type to playback the recorded video file of all the
camera, or one camera over the other or alongside on a single screen.
(3) De-interlace To enhance the video quality. Set the de-interlace mode to #1, if you are capturing
motionless picture and #2, if it captures lots of movement. To disable the
de-interlace function, select off.
(4) Playback menu To call out playback menu(see also Chapter 2.3.1 )
(5) Preview Switch to Preview mode.