Ptz camera setting, 3 ptz camera setting – AVer SEB3104H User Manual

Page 42

Advertising
background image

36

3.2.3 PTZ Camera Setting

Configure PTZ camera parameters and preset position. Click OK to save the setting, click Cancel to
exit without save. When PTZ camera is set, user can control PTZ camera through PTZ control panel
on preview and playback mode (see also

Chapter 2.3.2

).

(1)

(2)

(3)

(4)

(5)

(1) Select Camera
Select the camera number that is a PTZ camera to configure.
(2) Connection Setting

-

Use PTZ: Enable/disable the PTZ camera function.

-

Com Port: display the com port that is connecting with DVR system.

-

ID: select the ID number for the camera.

-

Baud Rate: Select the baud rate of com port which is connect with DVR system.

-

Protocol: Select the protocol of PTZ camera. Please refer to your PTZ camera user

’s

manual.

(3) Preset Setting

-

Preset Number: Set a camera lens to a position that user is defined. Select the Preset

number and using (5) PTZ control panel to adjust the camera lens to the wanted position.
Repeat to set reset of preset position.

-

Dwell Time: Set a time for how long the PTZ camera stays in that position before it moves to

the next one.

-

Restore AutoPan Time: Set a time period for restoring auto path function after the PTZ

camera has been moved. Mark the Restore AutoPan Time check box and select the time
period in second.

(4) Preview Screen
Display the video of selected PTZ camera.
(5) PTZ Control Panel
To control PTZ camera lens to move up, down, left, right, zoom in/out, focus in/out, and speed
up/down when setup up preset position.

Advertising