AVer SEB3104H - Manual (Page 79)

73
Name Function
(15) Alarm Alert and display warning info. Only Administrator-level can reset and turn on,
off and trigger the Sensor and Relay by right-clicking the item in the Sensor
and Relay list.
(16) Audio Enable/disable the sound display
(17) DirectDraw Enhance the video quality.
i Direct Draw function supports for certain VGA card. For more information, please contact your
VGA card vendor.
6.3.1 To Setup Remote Console Setting
Click Setup button to call out the System Setting windows. Click OK to exit and save the setting
and Cancel to exit without saving the setting.
(1)
(2)
(3)
(4)
(1) Storage Path
Set the directory on where to save the data. When there is not enough free space to record one
hour data, the system automatically replaces the oldest data. In case you have more than one
storage path, the system automatically saves the data to the next storage path. By default the data
is stored in C:\RemoteData, to insert another storage path, click Add. To remove the selected path,
click Delete.
- Enable network storage
Select the Enable network storage check box to send the recorded video in network attached
storage.
i
To add network storage, the Internet storage drive/folder must be mapped as Network Driver in
DVR server. To know how to assign or connect to a network drive, please refer to your Windows
help file and search “Map Network drive”.
(2) Language
Customize the system to display the tool tips and dialogs based on the selected language. By
default the language is in English.