AVer SEB3104H - Manual (Page 85)

79
Name Function
(15) Visual Search Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second.
(See also
Chapter 6.4.1.2 )
(16) Find Next Search for the next event or changes in the motion detector frame. You can use
this when you are using Intelligent Search or Event Search function.
(17) Intelligent Search Search the changes in the motion detector frame (See also Chapter 6.4.1.3 ).
(18) Audio Enable/disable audio play
(19) De-interlace To enhance the video quality. Set the de-interlace mode to #1, if you are
capturing motionless picture and #2, if it captures lots of movement.
6.4.1.1 To Cut and Save the Wanted Portion of the Recorded Video
5. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on
where you want to start the cut. Then, click Segment to set the begin mark.
6. Use the Playback Control buttons or drag the bar on the playback progress bar and pause on
where you want to end the cut. Then, click Segment to set the end mark. To cancel
segmentation or set the segment marks from the start, click Segment button again.
7. Click Export >> Output button to save the wanted clip.
8. In the Save As dialog box, locate on where you want to save the file, type the filename, and
select the video format.