AVer SEB3104H - Manual (Page 51)

45
the Recording Setting or Max to record the maximum of frames based on the available
speed.
3. In the Start Recording prior text box, mark and set the number in second for the DVR
system to pre-recording before the alarm happen.
4. In the Stop Recording after text box, mark and set the number in second for the DVR
system to continue recording after the alarm has ended. If user doesn
’t mark and set the
time, the alarm recording will continue recording until alarm is reset.
- PTZ Preset Point
Position the PTZ camera based on the preset point setting.
Beside the PTZ preset point check box, click Detail. In the Trigger PTZ Preset Setting dialog
box, select the PTZ camera number then select the Enable check box. Select the position of
the PTZ camera when the alarm is activated and ended. For the PTZ camera ended point,
user also can select one preset position or Auto Path between preset position groups.