Kontron AT8060 - Manual (Page 145)

C-1 AT8060
www.kontron.com
C. BIOS Setup Error Codes
C.1 Memory Reference Code
C.1.1 Progress Codes
C.1.2 Error Codes
Code Description
0B0h Detect DIMM population
0B1h Set DDR3 frequency
0B2h Gather remaining SPD data
0B3h Program registers on the memory controller level
0B4h Evaluate RAS modes and save rank information
0B5h Program registers on the channel level
0B6h Perform the JEDEC defined initialization sequence
0B7h Train DDR3 ranks
0B8h Initialize CLTT/OLTT
0B9h Hardware memory test and init
0BAh Execute software memory init
0BBh Program memory map and interleaving
0BCh Program RAS configuration
0BFh MRC is done
Code Description
0E8h No Memory
0E9h Memory is locked by LT, inaccessible.
0EAh DDR3 training did complete successfully
0EBh Memory test failure
0EDh UDIMMs and RDIMMs are both present DIMM vendor-specific errors