Kontron AT8060 - Manual (Page 67)

52 AT8060
www.kontron.com
76 Bios Flash 1 Discrete
Bios Flash 1
Sensor type = 1Eh Boot Error
Event Reading type code = 6Fh Sensor Specific
Only offset 3 is used
See IPMI v2.0 table 42-3, Sensor type code 1Eh for sensor
definition
77 ACPI State Discrete
Advance Configuration and Power Interface State
Sensor type = 22h System ACPI Power State
Event Reading type code = 6Fh Sensor specific
Only offset 0,4,5,10,11,12,14 are used.
See IPMI v2.0 table 42-3, Sensor type code 22h (ACPI Power
State) for sensor definition
78 IPMI Watchdog Discrete
IPMI Watchdog (payload watchdog)
Sensor type = 23h Watchdog 2
Event Reading type code = 6Fh Sensor specific
Only offset 0,1,2,3,8 are used
See IPMI v2.0 table 42-3, Sensor type code 23h (Watchdog 2) for
sensor definition
79 Health Error Discrete
General health status, Aggregation of critical sensor
This list is flexible and could be adjust based on customer
requirements
Sensor type = 24h Platform Alert
Event Reading type code = 03h Digital Discrete
Only offset 0,1 are used
See IPMI v2.0 table 42-3, Sensor type code 24h for sensor
definition
80 IPMB0 Link State Discrete
IPMB-0 fault detection sensor
Sensor type = F1h PICMG Physical IPMB-0
Event Reading type code = 6Fh Sensor specific
See PICMG 3.0 R3.0 Table 3-69, “Physical IPMB-0 event message”
81 FRU0 IPMBL State Discrete
IPMB-L branch from FRU0 fault detection sensor
Sensor type = C3h OEM (Kontron OEM IPMB-L link state)
Event Reading type code = 6Fh Sensor specific
Only offset 2 and 3 are used
See OEM table, Sensor type code C3h (Kontron OEM IPMB-L Link
State) for sensor definition