Kontron AT8060 - Manual (Page 89)

Software Setup
74 AT8060
www.kontron.com
IDO Completion Enable Disabled, Enabled
If supported by
hardware and set to
'Enabled', this permits
setting the number of
ID-Based Ordering (IDO)
bit (Attribute[2])
requests to be initiated.
LTR Mechanism Enable Disabled, Enabled
If supported by
hardware and set to
'Enabled', this enables
the Latency Tolerance
Reporting (LTR)
Mechanism.
End-End TLP Prefix
Blocking
Disabled, Enabled
If supported by
hardware and set to
'Enabled', this function
will block forwarding of
TLPs containing End-End
TLP Prefixes.
PCI Express GEN2 Link
Register Settings
Title
Target Link Speed
Auto, Force to 2.5
GT/s, Force to 5.0
GT/s
If supported by
hardware and set to
'Force to 2.5 GT/s' for
Downstream Ports, this
sets an upper limit on
Link operational speed
by restricting the values
advertised by the
Upstream component in
its training sequences.
When 'Auto' is selected
HW initialized data will
be used.
Feature Option Description Help text