Rice Lake Intrinsically Safe - Manual (Page 54)

48 320IS Installation Manual
For example, if the annunciator status value returned on the ZZ command is 148, the gross, standstill, and lb
annunciators are lit: 148 represents the sum of the values for the standstill annunciator (16), gross mode
annunciator (128), and the lb/primary units annunciator (4).
7.3 Continuous Output (Stream) Format
Figure 7-1 shows the continuous output format sent to the
320IS
EDP or printer port when the STREAM parameter
(SERIAL menu) is set to either EDP or PRN.
Figure 7-1. Continuous Output Data Format
Decimal
Value Annunciator
1 Tare
2 Count
4 lb
8 kg
16 Standstill
32 Center of zero
64 Net
128 Gross
Table 7-3. Status Codes Returned on the ZZ Command
<STX> <POL> <wwwwwww> <UNIT> <G/N> <S> <TERM>
ASCII
02 (decimal)
Polarity: <Space>
= Positive
<–> = Negative
<^> = Overload
<]> = Underrange
Weight data: 7 digits, right-justified, with
decimal point, leading zero suppression.
Overload =
^^^^^^^
Underrange = ] ] ] ] ] ] ]
Display overflow = OVERFL
L = pounds
K = kilogram
T = ton
G = grams
O = ounces
<space> = none
G = Gross
N = Net
Status: <space> =
valid
I = Invalid
M = In motion
O = Over/under range
<CR> <LF> or
<CR>
ASCII 13, 10
(decimal)