8 i/o module mounting – Rice Lake Intrinsically Safe User Manual
Page 69
Advertising
320IS Installation Manual - Appendix B
63
8.8
I/O Module Mounting
The
320IS
is capable of being mounted to any surface in the safe area using the mounting holes of the enclosure
(see Figure 8-5 on page 63). Use 1/4" or larger mounting hardware.
Mounting surface must be capable of holding four times the weight of the
320IS
and wiring.
Figure 8-5. 320IS Enclosure Dimensions
Note
7.50
10.84
(11.63)
(12.90)
.40
1.75
4x Ø.25
Ti ghten until clamps bottom out to fully compr
ess gasket
Advertising
This manual is related to the following products: