4 scale base, 5 handle electrode, 4 scale base 2.5 handle electrode – Rice Lake Upper Body Single Frequency Composition Analyzer - D1000-2 User Manual
Page 13
Advertising
Competitor Series Installation & Operation Manual — Introduction
9
2.4
Scale Base
The scale base consists of:
•
Scale base consisting of four plate electrodes that measures weight. The plate electrodes measure
impedance which is how fast electrical ohms travel through the body. This scale base is only available in
the D1000-3 (Full Body) and D1000-1 (Foot to Foot) models.
Figure 2-4. Scale Base (Shown D1000-3 and D1000-1 Models)
2.5
Handle Electrode
The handle electrode is a hand held device that measures the impedance of the body by flowing low levels of
electric current.
Figure 2-5. Handle Electrode
Advertising
This manual is related to the following products: