Additional safety precautions – Rice Lake Upper Body Single Frequency Composition Analyzer - D1000-2 User Manual

Page 6

Advertising
background image

WARNING

2

Competitor Series Installation & Operation Manual

Please consult with a doctor before using this device in any case below.

• Any woman taking contraceptives

• Any woman who is/or suspects that she is pregnant.

• Anyone who can be damaged physically by even a small amount of electric stimulation.

• In case of using electric or electronic devices with good conductivity.

Do not touch signal input, signal output or other connectors, and the patient simultaneously.

The power cable should be pulled out after the power switch is turned off.

Do not operate this device with wet hands. It can cause electric shock.

The power switch in the main unit should be turned off when this device is connected to other equipment.

The person who has implanted electrical devices can be exposed to unavoidable shock by leaking current or potential
difference between two surfaces of conductive materials if there are any other electrical appliances near this device. To
protect people from those risks, the adapter offered with this device should be used.

Do not open or disassemble this unit without consent of your local distributor or our company.

If the result is abnormal or strange, you should consult with a doctor or an authorized expert.

Do not allow minors (children) or inexperienced persons to operate this device.

Do not use in the presence of flammable materials.

Do not make alterations or modifications to the scale.

Do not drop the device or subject it to violent shocks.

Operating at voltages and frequencies other than specified could damage the equipment.

To avoid cross contamination, the scale should be cleaned regularly.

Avoid contact with excessive moisture.

Additional Safety Precautions

Failure to follow the instructions or heed these warnings could result in serious injury or death.

The following precautions must be observed for customer’s safety.

• This device has been adjusted to the optimal performance at the time of factory release.

• Do not attempt to modify or adjust any preset controls or switches except those specified in this manual for operation.

If any modification is needed, ask your local distributor for service.

• If you have any trouble with this device, turn it off immediately and contact your local distributor for assistance.

• Avoid the following environments in using and storing this device.

-Where the ambient temperature falls below -4°F or exceeds 140°F for storage (-20°C or exceeds 60°C) for storage.

-Where the ambient temperature falls below 50°F or exceeds 104°F (10°C or exceeds 40°C) for use.

-Where the atmospheric pressure falls below 70 kPa (700 mbar) or exceeds 106 kPa (1060 mbar).

-Where the humidity falls below 30% or exceeds 75% for use.

-Where the humidity is over 95% for storage.

-Where this device is exposed to water stream or splashing water.

-Where this device is exposed to dust.

-Where this device is exposed to high-density oil vapor.

-Where this device is exposed to a salty atmosphere.

-Where this device is exposed to explosive gases.

-Where this device is exposed to excessive shock or vibration.

-Where this device is inclined over 10 degree of an angle.

-Where this device is exposed to direct sunlight.

Advertising