Rice Lake Upper Body Single Frequency Composition Analyzer - D1000-2 - Manual (Page 7)

Important
CAUTION
Competitor Series Installation & Operation Manual — Safety 3
• Power should be supplied through the adapter and the cable offered with this device. The accessories for power
supply should be the ones compatible with International Standard. The accessories connected to the analog and
digital interfaces are certified by the respective IEC standards. (e.g. IEC 950 to data processing equipment, IEC
60601-1 to medical equipment and system standard EN 60601-1-1:1995).
In case of scrapping this device, it should
follow the related laws and regulations.
• If this device has been exposed to foreign materials or exceptional environments, it should be checked before use.
• In case of using this device after a long period of non-use, it should be checked carefully before use.
• Observe general precautions on using electric devices and the things specified in this manual.
• The device must not be cleaned with lubricant or alcohol-based products. Plate electrode and coating can be peeled
off. Use a dry cloth or wet tissue.
In case of mechanical failure, please contact Rice Lake Weighing Systems.
This equipment has been tested and found to comply with the limits for medical devices to the IEC
60601-1-2:1994. These limits are designed to provide reasonable protection against harmful interference
in a typical medical installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to other devices in the
vicinity. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to other devices, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving device.
- Increase the separation between the equipment.
- Connect the equipment into an outlet on a circuit different from that to which the other device(s) are connected.
- Consult the manufacturer or field service technician for help.
Classifications:
• Type of protection against electric shock: Class I Equipment
• Degree of protection against electric shock: Type BF Applied Parts
• Degree of protection against the ingress of water: IPX0
• Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen
or nitrous oxide .