Rice Lake Upper Body Single Frequency Composition Analyzer - D1000-2 - Manual (Page 27)

Competitor Series Installation & Operation Manual — Measurement and Analysis 23
5.4 Body Composition Weighing Measurement
1. Turn the Competitor Series on by pressing the
ON/OFF
key. The following screen is displayed.
Body Composition
Analyzer
Step on scale to Activate
CLOTHES
0.0
BCA lb
Figure 5-4. Body Composition Analyzer Main Screen
2. Select the
BCA
button to measure the body composition of the person. This will toggle the main screen
between Scale and BCA (Body Composition Analyzer)
SCALE
BCA
Deduct the Weight of Clothing.
The weight of clothing can be deducted prior to using the Competitor Series scale. To deduct (or tare off the
weight) of your clothing prior to using the Competitor Series use the following steps.
1. Press and hold the
ON/OFF
button to power up the unit.
2. Press the
CLOTHES WEIGHT
button and hold for approximately four to five seconds and the following
screen appears on the display.
CLOTHES
0.0
Lb
Figure 5-5. Enter Clothes Weight
3. Use the numbered buttons to enter the clothing weight until the desired amount is entered.
4. Press the
NEXT
button to save that weight value and you will hear a chime stating that the entered weight
has been accepted.
5. Now step on the scale, the screen changes with a chime bell.
• Do not move or speak until the weight measurement is completed.
• The measured weight is displayed on the screen.
• The measuring range is 22.0 to 440.9 lb (10 - 200 kg).
6. After the weight measurement, continue to input the personal data.