Rice Lake Upper Body Single Frequency Composition Analyzer - D1000-2 - Manual (Page 17)

Competitor Series Installation & Operation Manual — Installation and Setup 13
3.8 Optional Column Installation
The Competitor Series scale has an optional column that can be purchased. Use the following steps to install the
optional column.
Note
It is recommended using two people to install the optional column.
1. Use the component parts shown in Figure 3-6.
Figure 3-6. Optional Column Components
Table 3-1. Optional Column Assembly Parts
Key Number Description (quantity)
1 Digital display (1)
2 Digital display mounting bracket (1)
3 AC adaptor (1)
4 Optional column (1)
5 Scale base (1)
6 M6 Socket head cap screw and washer (4)
7 Cap screw, heck socket flat w/ countersunk head (4)
8 Machine screw, pan head 6-32 x 5/8 (4)
9 Column cover assembly (1)
10 Allen wrench, 4mm (1)
11 Allen wrench, 5mm (1)
12 DB-9 cable (1)
2. Fasten the DB-9 scale base cable as shown in Figure 3-7
Figure 3-7. Fasten Weight Scale Cables