Rice Lake Upper Body Single Frequency Composition Analyzer - D1000-2 - Manual (Page 18)

14 Competitor Series Installation & Operation Manual
3. Assemble the mounting bracket by aligning the bolt holes located at the bottom of the weight scale and
using a 5 mm Allen wrench (provided).
Figure 3-8. Attach Mounting Bracket
4. Attach the digital display to the column using a screwdriver to attach the display with four bolts as shown
on the left hand side of Figure 3-9.
Figure 3-9. Column Attachment
5. Place the scale base on a flat and level surface.
6. Insert the column into the bracket, making sure that the cable is out of the column as shown in the center
illustration of Figure 3-9.
7. Insert plate bolts into the holes as shown in the right hand picture of Figure 3-9. Fasten the bolts using a 4
mm Allen wrench (included).