Rice Lake Upper Body Single Frequency Composition Analyzer - D1000-2 - Manual (Page 19)

Competitor Series Installation & Operation Manual — Installation and Setup 15
3.9 Column Cover Assembly
Insert the column cover as shown in Figure 3-10.
Figure 3-10. Column Cover Assembly
3.10 Connect Power Supply and Scale Cable
Connect the scale cable to the scale port located on the back of the digital display by fastening the DB-9 cable
bolts.
Connect the adapter cable to the adapter port and plug the power cord into the power outlet.
Figure 3-11. Power Supply and Scale Cable Connection Locations
Note
CAUTION
Before connecting a peripheral device to this scale, the power should be turned off, otherwise the scale
could malfunction or be damaged due to electric shock.
Power should be supplied from this device to ensure safe operation and durable performance.
This scale should be powered with only the adapter and cable that are supplied with this product.
Be careful not to touch the scale base part of the scale when the power switch is turned ON.
The scale zeros on power up. For accurate readings, press the zero reset button on the digital display.