Rice Lake Upper Body Single Frequency Composition Analyzer - D1000-2 - Manual (Page 23)

Competitor Series Installation & Operation Manual — Configuration 19
THERM LOGO Thermal logo can be used but
requires a PC with optional
Body Pass software. On
Off Scroll to THERM LOGO by using the left and right
arrows.
1. Press the NEXT button to access THERM
LOGO.
2. Use the left and right arrows to select either
On or Off.
3. Press the NEXT button to save the changes
and a chime rings.
Press the BACK button to exit back to the System
Setup menu screen.
GOAL SETTER Can be set from 3 — 30%. On
Off Scroll to GOAL SETTER by using the left and right
arrows.
1. Press the NEXT button to access GOAL
SETTER.
2. Use the left and right arrows to select either
On or Off.
3. Press the NEXT button to save the changes
and a chime rings.
Press the BACK button to exit back to the System
Setup menu screen.
WRESTLER MODE This mode provides weight,
mass of fat body and lean
body mass to maintain the
minimum P.B.F. Off
High School
College Scroll to WRESTLER MODE by using the left and
right arrows.
1. Press the NEXT button to access
WRESTLER MODE.
2. Use the left and right arrows to select either
Off, High School or College.
3. Press the NEXT button to save the changes
and a chime rings.
Press the BACK button to exit back to the System
Setup menu screen.
START
MEASUREMENT
MODE Selects the start mode Auto
Manual Scroll to START MODE by using the left and right
arrows.
1. Press the NEXT button to access START
MODE.
2. Use the left and right arrows to select either
Auto or Manual.
3. Press the NEXT button to save the changes
and a chime rings.
Press the BACK button to exit back to the System
Setup menu screen.
Parameter Description Choices Steps
Table 4-1. System Setup Parameters