Rice Lake TradeRoute HL Series - Low Profile Installation and Setup for Models from 2011 and Older 128406 User Manual
Page 12
9
10. Attachment of Container to Scale
Once the scale modules are attached to the truck frame, the container can be attached
to the scale.
Mounting brackets must be attached to the container to bolt the container to the scale.
Mounting hole dimensions are shown in the following figures. Rice Lake Weighing
Systems recommends the following bolt sizes for attaching the container to the scale.
System Size Hole Drill Size
Bolt Size
Torque Spec (ft.-lbs.)
5K or 10K
3/4”
5/8” Grade 8
70 – 90
15K
7/8”
3/4” Grade 8
90 – 110
Measure distance D from module to module to determine distances between mounting
brackets on the container. All hole dimensions must be
1/16”.
IMPORTANT: Bolts shown below are used for shipping and
keeping the load cell assemblies aligned during installation. They
must be removed as soon as the container is attached to the scale
and before testing hydraulics.
Figure 6 - Mounting Hole Dimensions