Rice Lake TradeRoute HL Series - Low Profile Installation and Setup for Models from 2011 and Older 128406 - Manual (Page 23)

20
15.2 Conduit Connections
Follow Figure 13 for assembly of conduit connectors.
Figure 13 – Non-Metallic Conduit Connectors
All Load Cell Cables are run in the flexible conduit.
The power wire and reed switch (Hardware Alarm) is not run in conduit.
15.3 Conduit Termination
The keep moisture and unwanted pests and debris from the cable, before pulling the
wire through the conduit, install the sealing grommet & bushing over the cable that is
run inside the conduit.