Rice Lake TradeRoute HL Series - Low Profile Installation and Setup for Models from 2011 and Older 128406 - Manual (Page 38)

35
17. Final Installation Check List
Ensure a good consistent +12V DC power source.
Check proper operation of the Hardware Alarm.
Level Switch check. Turn on the indicator and move the truck onto
a slope larger than 6 Degrees, the indicator will show OFF LEVEL.
Do this in all four directions front high, front low, left high and left
low.
Check to ensure the scale swings freely at all angles (does not
contact anything off the scale)
After calibration is completed, check the lockdown adjustment.
(See page 14)
Check all hoses, wiring and any other components to ensure they
do not interfere with the operation of the scale.
Ensure all mounting bolts are tight.
Check that fenders are mounted to the truck frame (not the scale)
Make certain all personnel using the scale have a full understanding
of the operation and any safety precautions.
____________________________ _______________
Name Date