Welch Allyn Connectivity Server - User Manual User Manual
Page 39
Advertising
Directions for Use
Configure the WACS HL7 Interface option
35
View and change values in the HL7 - General Settings page
To change values for an item
1.
In the New Value column, specify your changes.
•
Checkboxes: Check or clear boxes to turn settings on or off.
•
Fields: Take these steps:
a.
Hover your pointer over a field in the row.
The range of acceptable values appears.
b.
In the field, type a value within the acceptable range of values.
•
Pull-down menus: Click the pull-down menu and make a selection.
If you want to discard the changes, click Reset.
2.
Click Save Changes.
3.
Reboot WACS. (For reboot instructions, see
“Log out of the WACS program or reboot
Your changes take effect
Advertising